Skip to main content

Center for Training and Development >> Safety and Construction
« back to courses page

Industrial safety classes such as Mine Safety and Health Administration (MSHA), Occupational Safety and Health Administration (OSHA), and other safety classes related to construction.

Click on the course title to see the full course description. There may be multiple pages of classes listed. Use "show all" or the arrows to switch pages.

Key:  ProTrain icon = ProTrain online course  OLLI icon = for OLLI members only

 
This class provides entry-level workers with information to reduce workplace injuries and illnesses. OSHA training helps workers become knowledgeable about workplace hazards and their rights and how to recognize, avoid, abate, and prevent safety and health hazards in the workplace. This entry-level class provides workers with information to reduce workplace injuries and illnesses.  

CTD

Weekly - Fri, Sat 7:00 AM - 1:00 PM (6/15/2018-6/16/2018)

Instructor : Payton Zierolf 

Location : Nolte Gateway Center Location : 
  Nolte Gateway Center.

Room :  218



View Details »
This class provides entry-level workers with information to reduce workplace injuries and illnesses. OSHA training helps workers become knowledgeable about workplace hazards and their rights and how to recognize, avoid, abate, and prevent safety and health hazards in the workplace. This entry-level class provides workers with information to reduce workplace injuries and illnesses.  

CTD

Weekly - Thu, Fri 7:00 AM - 1:00 PM (8/2/2018-8/3/2018)

Instructor : Payton Zierolf 

Location : Nolte Gateway Center Location : 
  Nolte Gateway Center.

Room :  115



View Details »
All new surface miners must have 24 hours of training – MSHA 30 CFR 48.25/46.5. Topics covered include statutory rights of miners and their representatives; authority and responsibility of supervisors; self-rescue and respiratory devices; transportation controls and communication systems; introduction to work environment; escape and emergency evacuation plans; fire warning and firefighting; ground control; working in areas of high walls, water hazards, pits, and spoil banks; illumination and night work; health; electrical hazards; first aid; explosives; and health and safety of tasks assigned to new miners.  

Weekly - Tue, Wed, Thu 7:00 AM - 4:00 PM (6/12/2018-6/14/2018)

Instructor : Wyoming Program 

Location : Nolte Gateway Center Location : 
  Nolte Gateway Center.

Room :  115



View Details »
All new surface miners must have 24 hours of training – MSHA 30 CFR 48.25/46.5. Topics covered include statutory rights of miners and their representatives; authority and responsibility of supervisors; self-rescue and respiratory devices; transportation controls and communication systems; introduction to work environment; escape and emergency evacuation plans; fire warning and firefighting; ground control; working in areas of high walls, water hazards, pits, and spoil banks; illumination and night work; health; electrical hazards; first aid; explosives; and health and safety of tasks assigned to new miners.  

Weekly - Tue, Wed, Thu 7:00 AM - 4:00 PM (7/10/2018-7/12/2018)

Instructor : Wyoming Program 

Location : Nolte Gateway Center Location : 
  Nolte Gateway Center.

Room :  115



View Details »
All new surface miners must have 24 hours of training – MSHA 30 CFR 48.25/46.5. Topics covered include statutory rights of miners and their representatives; authority and responsibility of supervisors; self-rescue and respiratory devices; transportation controls and communication systems; introduction to work environment; escape and emergency evacuation plans; fire warning and firefighting; ground control; working in areas of high walls, water hazards, pits, and spoil banks; illumination and night work; health; electrical hazards; first aid; explosives; and health and safety of tasks assigned to new miners.  

Weekly - Tue, Wed, Thu 7:00 AM - 4:00 PM (8/7/2018-8/9/2018)

Instructor : Wyoming Program 

Location : Nolte Gateway Center Location : 
  Nolte Gateway Center.

Room :  115



View Details »
OSHA training helps workers become knowledgeable about workplace hazards and their rights and how to recognize, avoid, abate, and prevent safety and health hazards in the workplace. The extended learning in the 30-hour class is intended for supervisors or workers with safety responsibilities.  

CTD

Weekly - Mon, Tue, Wed, Thu 7:00 AM - 3:00 PM (6/18/2018-6/21/2018)

Instructor : Payton Zierolf 

Location : Liesinger Hall Location : 
  Liesinger Hall.

Room :  185



View Details »
OSHA training helps workers become knowledgeable about workplace hazards and their rights and how to recognize, avoid, abate, and prevent safety and health hazards in the workplace. The extended learning in the 30-hour class is intended for supervisors or workers with safety responsibilities.  

CTD

Weekly - Mon, Tue, Wed, Thu 7:00 AM - 3:00 PM (8/6/2018-8/9/2018)

Instructor : Payton Zierolf 

Location : Liesinger Hall Location : 
  Liesinger Hall.

Room :  185



View Details »
All miners must have a minimum of eight hours of annual refresher training – MSHA 30 CFR 48.28. Topics include mandatory health and safety standards; transportation controls and communication systems; escape and emergency evacuation plans; fire warning and firefighting; ground control; working in areas of high walls, water hazards, pits, and spoil banks; illumination and night work; first aid; electrical hazards; accident prevention; health; explosives; self-rescue; and respiratory devices. You must take the annual refresher during or before your expiration month.  

CTD

Weekly - Fri 7:00 AM - 4:00 PM (6/15/2018-6/15/2018)

Instructor : Wyoming Program 

Location : Nolte Gateway Center Location : 
  Nolte Gateway Center.

Room :  115



View Details »
All miners must have a minimum of eight hours of annual refresher training – MSHA 30 CFR 48.28. Topics include mandatory health and safety standards; transportation controls and communication systems; escape and emergency evacuation plans; fire warning and firefighting; ground control; working in areas of high walls, water hazards, pits, and spoil banks; illumination and night work; first aid; electrical hazards; accident prevention; health; explosives; self-rescue; and respiratory devices. You must take the annual refresher during or before your expiration month.  

CTD

Weekly - Fri 7:00 AM - 4:00 PM (7/13/2018-7/13/2018)

Instructor : Wyoming Program 

Location : Nolte Gateway Center Location : 
  Nolte Gateway Center.

Room :  115



View Details »
All miners must have a minimum of eight hours of annual refresher training – MSHA 30 CFR 48.28. Topics include mandatory health and safety standards; transportation controls and communication systems; escape and emergency evacuation plans; fire warning and firefighting; ground control; working in areas of high walls, water hazards, pits, and spoil banks; illumination and night work; first aid; electrical hazards; accident prevention; health; explosives; self-rescue; and respiratory devices. You must take the annual refresher during or before your expiration month.  

CTD

Weekly - Fri 7:00 AM - 4:00 PM (8/10/2018-8/10/2018)

Instructor : Wyoming Program 

Location : Nolte Gateway Center Location : 
  Nolte Gateway Center.

Room :  115



View Details »
Many large companies require contractors to subscribe to a third-party online contractor management database, such as ISNetworld, PEC Safety, BROWZ, Avetta, or Veriforce. It can be frustrating and time-consuming to complete the initial registration and maintain an approved status. This class will help contractors understand the initial and hidden costs of these databases, how to complete and submit required information, and the strategy for maintaining approved status.  

CTD

Weekly - Fri 8:00 AM - 10:00 AM (6/22/2018-6/22/2018)

Instructor : Emily Farley 

Location : Nolte Gateway Center Location : 
  Nolte Gateway Center.

Room :  222



View Details »
Many large companies require contractors to subscribe to a third-party online contractor management database, such as ISNetworld, PEC Safety, BROWZ, Avetta, or Veriforce. It can be frustrating and time-consuming to complete the initial registration and maintain an approved status. This class will help contractors understand the initial and hidden costs of these databases, how to complete and submit required information, and the strategy for maintaining approved status.  

CTD

Weekly - Mon 8:00 AM - 10:00 AM (7/16/2018-7/16/2018)

Instructor : Emily Farley 

Location : Nolte Gateway Center Location : 
  Nolte Gateway Center.

Room :  223



View Details »